wire fire

Melting AC

Hi Kevin

I purchased an old 1989 cruiser, a Regal 280 Commodore, and tripped the 20 amp dockside breaker while using a hatch a/c unit and an electric kettle. I have 30 amp service in the boat.

I reset the breaker and then the AC electric system worked for a few minutes and then went dead. Neither the dockside breaker nor onboard breaker tripped, but we smelled a burning smell. I immediately unplugged the AC system and looked behind the AC panel.

At the main breaker switch where the shore power comes in, I found the white wires melted and melting damage to the black wires. I can fix all the wires, but there is also some sort of capacitor that was wired as a jumper between the green and white wires and it is not in the wiring diagram of the boat. It looks like it has been burned out. I want to know what to replace it with, and then if this overall problem is something that points to the result of another problem or if it may have been some old wires getting warm and then touching.

I can replace everything as it was once I know what to put between the black and green wires, but don’t want to do that and then plug it in if there may be other issues that need addressing.

Thanks for your help.

Hi,

The only connection in your panel between the neutral and ground would be a reverse polarity indicator. Instead of a light, some boats have an alarm. Some of the piezoelectric alarms look like capacitors.

Hope this helps

Kevin